Metrology Jingstone

CALIBCATORS

All new calibrators come with new innovative design in structural quality, functionality, and accuracy, a total upgrade to satisfy your upmost demand.

Metrology Technology calibrators were researched, developed, designed, manufactured, assembled and inspected in Taiwan. Our calibrators received numbers of patents and awards from Germany, United States, UN, and Taiwan.

All inspection and calibration is according to ISO standards. Our length calibrators are perfectly suitable for factories and calibration laboratories.

Tower Outside Checker

For calibrating outside of all types of calipers, measuring tools, and setting zero of outside micrometers. All models are with a step of 25mm.

Made of heat treated hardened tool steel, hardness: HRC58-62

Checker body and base are chromed polished, wear resistant, and rust resistant to ensure measuring accuracy and durability.

Certificate of calibration issued by accredited calibration Laboratory, JCC (TAF 0193 ISO/IEC 17025). Inspection reading: 0.1um

X’mas tree

Model

TOC-X150

TOC-X200

TOC-X300

Measuring range

25 – 150mm

25 – 200mm

25 – 300mm

Step

25mm

Size Tolerance

±3um

±4um

±5um

Parallelism

≦1.5um

≦2.0um

≦5.5um

Flatness

1um

Cylinder Depth Checker

For calibrating depth error of all types of caliper depth rods, outside accuracy
inspection and zero setting of depth micrometers, depth calipers, dial depth gauges

Made of heat treated hardened tool steel, hardness: HRC58-62

Checker body and base are chromed polished, wear resistant, and rust resistant to
ensure measuring accuracy and durability.

Checker face dimension tolerance:±0.003mm
parallelism and flatness max error: 0.002mm

Cylinder Depth Checker

Model

CDC-400D

Granite base           

100x100x50mm

Lock pin Φ3xL15mm

20pcs

Cylinder measuring gauge set

5、10、15、20、25、50、75、100mm*2

Standard accessories

Full set includes wooden case, quality warranty, and JCC calibration report

comply with ISO 9001 measuring, traceability & ISO/IEC 17025 accreditation

Surface Plate Repeat
Checking Calibrator

Calibration for cast iron base flatness, granite plate flatness, machine bed flatness,
straightness of precision platform, and etc.

Hardened tool steel, heat treated, precision grinding, and surface coating rust
resistant.

Hardened tool steel, heat treated, precision grinding, and surface coating rust
resistant.

Including wooden case, quality warranty, and JCC calibration report comply with
ISO 9001 measuring traceability & ISO/IEC 17025 accreditation

Surface Plate Repeat Checking Calibrator

Model

PLA-9001

PLA-9002

PLA-9003

PLA-9004

Calibration Range

Diagonal L≧150≦550mm

Diagonal L≧550≦1100mm

Diagonal L≧1100≦2200mm

Diagonal L≧2200≦3300mm

Step

50mm

100mm

150mm

200mm

Remark

Check local error of plate flatness

Checkmaster Gauge
Kingkong Series

For calibration of all types of calipers, micrometers, height gauge, and inspection
of machine, instrument linear accuracy.

Made of heat treated hardened tool steel, hardness: HRC58-62.

Including wooden case, quality warranty, and JCC calibration report that comply
with ISO 9001 measuring traceability & ISO/IEC 17025 accreditation

KING KONG Series

Model

Calibration Range

Calibration Point

Accuracy

CMG-9030

300mm

25 50 75 100 150 200 250 300 mm

±0.003mm

CMG-9060

600mm

25 50 100 150 200 300 400 500 600 mm

±0.005mm

Remark

*Checkermaster Gauge can be placed vertically, horizontally, and on sides for calibrating outside, inside, and height.

All calibration points are the same.

Checkmaster Gauge
Twin Series

For calibrating accuracy of height gauge, CMM, and inspecting linear accuracy of
machine tool.

Patented innovation design, can be placed vertically, horizontally, and 8-way on sides

Made of heat treated hardened tool steel, hardness: HRC58-62.

Including wooden case, quality warranty, and JCC calibration report that comply
with ISO 9001 measuring traceability & ISO/IEC 17025 accreditation

TWIN Series

Model

Calibration Range

Calibration Point

Accuracy

CMG-9030T

300mm

Pitch：10mm  Step：20mm

±0.0020mm

CMG-9060T

600mm

Pitch：10mm  Step：20mm

±0.0035mm

Remark

*Double gauge block measuring faces, double accuracy, purposes,and life-time.

*Must be placed in the best temperature controlled environment within 20 ±1°C

Ｍulti-functional Length Calibrator

For calibrating all types of calipers, inside micrometers, depth gauges, height gauge,indicators, bore gauges and other measuring applications

Made of heat treated hardened tool steel, hardness: HRC58-62

Easy to operate, calibration can be made by simply moving slide to positions

Gauge blocks combination does not require wringing, therefore reduce wearing to
gauge block surfaces.

A few gauge blocks combination is sufficient to meet calibration point of ISO
standard.

Full set includes wooden case, operational manual, quality warranty, and JCC
calibration report comply with ISO 9001 measuring traceability & ISO/IEC 17025
accreditation.

PERFECT Series

Model

LEN-9001

LEN-9002

LEN-9003

LEN-9004

Calibration Range

200 mm

300 mm

600 mm

1000 mm

Combination Max.error

0.002 mm

0.003 mm

0.005 mm

0.008 mm

Remark

Example of full set standard accessories : LEN-9001=LEN-SB1+GH1+HB1+TJ1+MJ

Gauge Block Hold Standard

Model

LEN-GH0

Range

100 mm

Standard Hold Base

Model

LEN-SB0

Range Length

200mm   Dia.Φ20mm

Height Base

Model

LEN-HB1

Range High

25 mm

Remark

* Hardened tool steel, accuracy of height and surface: 0.002mm

For calibrating depth and steps of calipers, height gauge, bore gauge, indicator and etc.

Two-Way Measuring Jaws Sets

Model

LEN-TJ1

2 Step size:

5/10mm x 6pcs

Remark

*Length: 50mm, Hardened tool steel, accuracy: ±0.0015mm

For calibrating inside and outside dimension of calipers, micrometers, and height gauges.

Multi- Use measuring Jaws

Model

LEN-MJ

Spec

Thickness: 10mm Dia.Φ: 8mm Slot width: 8*3mm

Remark

*Length: 80mm, Hardened tool steel, accuracy: ±0.0015mm

For calibrating depth and steps of calipers, also for holding indicators

Bore Gage Setter

Model

LEN-BS1

Spec

6~450mm Setting gauge / Pair

Size : 125*55*18mm / 55x9x12mm

Remark

*Hardened tool steel, parallelism of measuring face: 0.001mm.

For zero setting and accuracy inspection of bore gage

Parallel Measuring Jaws

Model

LEN-PJ

Spec

2pcs / Pair / Thickness:10mm /  Length:60mm

Remark

*Hardened tool steel, accuracy: hardened tool steel, accuracy: parallelism:0.001mm

For calibrating inside, outside of calipers, micrometers, single rod and extension rod type

inside micrometers, and measuring of set limit.

Setting Gauge

Model

LEN-SG

Spec

Size: 30*30mm / Thickness:5mm / Slot width:8*3mm

Remark

*Hardened tool steel, precision grinding.

For caliper depth and step calibration support use.

Gauge Block Sets

Model

LEN-GB1

LEN-GB2

Spec

5, 10, 20, 40mm *3pcs

5, 10, 20, 40*3pcs, 90mm *1pcs

Remark

* For calibrating calipers inside & outside, micrometers, height gauge, indicator,depth gage, bore gage.Calibration points are according to ISO standards

GAUGE BLOCK COMPARATOR
NANOCAL Series The best tool for ISO length calibration

GBC-NANOCAL Gauge Block Comparator is specially designed for the calibration or
dimensional inspection of gauge blocks with nominal lengths ranging from 0.1 to 300mm.

GBC-NANOCAL The configuration, which consists of two high-precision inductive probes aligned opposite one another with 0.01 μm display. The measuring system provides full guarantee for an extra low uncertainty of measurement.

Although METROLOGY GBC-NANOCAL Gauge Block Comparator is mainly intended formanufacturers and end-users of gauge blocks, this comparator is also widely used in ISO/IEC17025 national accredited calibration laboratories all over the world.

Gauge Block

Comparator       

Model

Measuring

Resolution

Repeatability

Uncertainty of Measurement (um)

GBC-P100

0.1~100mm

0.01um

≦0.025um

U95≦±(0.05+0.5L/1000) Reference Temperature 20 ± 1°C

GBC-P300

0.1~300mm

0.000001”

≦0.025um

U95≦±(0.03+0.3L/1000) Reference Temperature 20 ± 0.5°C

Universal Measuring & Calibration Instrument
TRANSFORMERS

Calibration function

For measuring length, thickness, outside dimension, and diameter

For measuring concentricity, coaxis, runout, and other geometric tolerance of
normal cylindrical workpiece. Pair with concentricity measuring tips.

Can combine with stereo microscope and image output microscope
For observation, inspection, analysis, and dimension measuring of metal, or non-metal workpiece surface.

Can be used for calibrating inside, outside of calipers, outside micrometer, inside
micrometer, bore gage and etc.

For calibrating micrometer heads, single rod inside micrometers, pin gauges, plug
gauges, standard bars, thread plug gauges, and etc.

Electronic Dial & Gauge Calibrator

For calibrating varies types of dial indicators, bore gauges, pin gauges, plug gauge,thread plug gauges, inside micrometers, standard bar, and measuring concentric,thickness, length of parts.

Hardened tool steel, heat treated, precision grinding, and surface coating rust resistant

Easy to operate, by simply moving concentric slide to set distance and to lock position,then proceed to measuring or calibration.

Full set includes wooden case, operational manual, quality warranty, and JCC calibration report comply with ISO 9001 measuring traceability & ISO/IEC 17025 accreditation

PERFECT Series

Model

D&G-9001

D&G-9002

D&G-9003

D&G-9004

Calibration Range

0-25mm/0-1”

0-25mm/0-1”

0-50mm/0-2”

0-25mm/0-1”

Comparison Calibration

200mm

200mm

300mm

200mm

Resolution

0.001mm/0.00005”

0.0001mm/0.000005”

Accuracy

0.003mm

0.002mm

0.004mm

0.001mm

Combination Sets

BS1+CS1+EM1+TJ+UC

BS2+CS2+EM1+TJ+UC

BS3+CS3+EM2+TJ+UC

BS4+CS4+EM1H+TJ+UC

Remark

*Accuracy: Max Permissible Error

Calibrator standard Base

Model

D&G-BS1

D&G-BS2

D&G-BS3

D&G-BS4

Range

200 mm

200 mm

300 mm

200 mm

Materials

Hardened Chromed Steel

Hardened Tool Steel

Hardened Chromed Steel

Hardened Tool Steel

Digital micrometer head

Model

D&G-EM1

D&G-EM2

D&G-EM1H

Specification

0-25mm/0.001mm/0.00005”

0-50mm/0.001mm/0.00005”

0-25mm/0.0001mm/0.000005”

Concentric slide

Model

D&G-CS1

D&G-CS2

D&G-CS3

D&G-CS4

Center Height

85mm   2pcs/pair

Concentricity

2um

1um

2um

1um

Materials

Hardened Chromed Steel

Hardened Tool Steel

Hardened Chromed Steel

Hardened Tool Steel

Bore gauge holder

Model

D&G-BH

D&G-SB

D&G-CT

Name

Bore gauge holder

Setting Gauge Block

Concentric measuring tip

Specification

For holding all types of bore gauge.

setting & extend measuring or calibration range 25、50、75、100mm (DIN 1)

For calibration test bar or measuring concentric of parts (2pcs/pair)

Materials

Hardened Chromed Steel

Hardened alloy steel

Hardened tool steel