Baluntech

Refine Search

BL672D Dual Blackbody Calibration Source

BL672D Dual Blackbody Calibration Source

The BL672D is a benchtop blackbody calibration source utilizing a digital indicating temperature ambient 30℃ to 50℃ (86F to 122F). Two 60mm diameter end closed tubes are heated or cooled with an internal solid-state thermoelectric heat pump. It has a built-in digital temperature controller to provide accurate, stable temperature as well as to provides readout.

FEATURE

0.99 emissivity
Two end closed tubes with 60mm diameter
0.05℃high stability
Calibrate from 30℃ to 50℃
Quickly heat up to 50℃in 10 minutes
Built-in temperature correction function
Quick and easy operate

Application

Calibrate thermal camera
Calibrate infrared thermometer

Specification

Temperature Range	30℃ to 50℃ (86F to 122F)
Aperture size	60 mm diameter
Emissivity	> 0.99
Display accuracy	± 0.05℃
Display resolution	0.01℃
Control stability	± 0.05℃ after 10 minutes
Blackbody uniformity	± 0.05℃
Heat cavity shape	Two end closed tube
Heat up time	10 minute from ambient to 50℃
Control method	Digital PID controller with readout
Temperature sensor	Precision platinum RTD
Power supply	110-220V AC, 50Hz, 60W
Interface	RS232
Dimension	435 mm(D) x 290 mm(W) x 200mm(H)
Net weight	Appr. 10 kg

Scope of delivery

· BL672D Dual blackbody calibration source with carrying case

· Power adapter as standard 110-240V AC

· Factory test report

Optional Accessories

USB into RS232 adapter (P/N:1622)

Accredited calibration certificate (P/N: 9000-672D)

Image gallery

BL672S Isothermal Blackbody Calibration Source

BL672S Isothermal Blackbody Calibration Source

With isothermal cavity, the BL672S is a portable blackbody calibration source utilizing a digital indicating temperature ambient 20℃ to 50℃ (68F to 122F). The 80 mm diameter end closed tube is heated or cooled with an internal solid-state thermoelectric heat pump. It has a built-in digital temperature controller to provide accurate, stable temperature as well as to provide readout.

FEATURE

The isothermal cavity
Better than 0.995 emissivity
80mm diameter aperture
0.05°C high stability
Calibrate from 20°C to 50°C
Built-in temperature correction function
Portable and easy operate.

Application

Calibrate ear infrared thermometer
Calibrate forehead infrared thermometer
Calibrate thermal camera
Calibrate infrared screening instrument
Calibrate infrared sensor

Specification

Temperature Range	20℃ to 50℃ (68F to 122F)
Aperture size	80 mm diameter
Emissivity	> 0.995
Cavity type	Isothermal Cavity
Display resolution	0.01℃
Control stability	± 0.05℃ after 10 minutes
Blackbody uniformity	± 0.05℃
Heat cavity shape	End closed tube
Heat up time	10 min. from amb. to 20℃, 10 min. from amb. to 50℃
Control method	Digital PID controller with readout
Temperature sensor	AAA Precison platinum RTD
Power supply	110-220V AC, 50Hz, 350W
Interface	RS232
Dimension	320 mm(D) x 195 mm(W) x 275mm(H)
Net weight	Appr. 6 kg

Scope of delivery

· BL672S Isothermal blackbody calibration source with carrying case

· Power adapter as standard 110-240V AC

· Factory test report

Optional Accessories

USB into RS232 adapter (P/N:1622)

Accredited calibration certificate (P/N: 9000-672S)

Image gallery

BL502 Pneumatic Dead weight Tester

BL502 Pneumatic Deadweight Tester

The model BL502 pneumatic deadweight tester is ideal primary standard for defining the pressure scale in pneumatic range from 5kPa to 10MPa.

The piston cylinder assembly is the heart of the dead weight tester and responsible for its high accuracy. We manufacture piston cylinder with accuracies from 0.05% up to 0.005% of reading.

Overview

Pressure ranges from 5kPa to 10MPa
Accuracy 0.05%rdg, 0.02%rdg, 0.01%rdg, (Increased accuracy option of 0.005%)
The piston and cylinder are tungsten carbide, which provides stability, durability, and low thermal coefficients and distortion.
Low pressure can be applied by built-in hand pump, while the higher pressure is applied by external gas supply
Pneumatic base is stainless steel material
Big piston areas to meet high precision
Assembled 2-stages air purifier on a molecule filter level
High quality needle valves provide optimum control and sealing
Piston/cylinder design provides stability and repeatability
In-field user friendly

Application

Primary pressure standard in lab
Reference pressure measure in workshop

Specification

Accuracy: 0.05%rdg, 0.02%rdg, 0.01%rdg, 50ppm (option)
Piston and cylinder material: Tungsten Carbide
Mass material: Forged 316 Stainless Steel
Hydraulic base material: Aluminium
Seal material: Buna-N, PTFE, Cu Alloy
Medium: Dry air (<700kPa), Pure nitrogen (>700kPa)
Gravity: Standard 9.80665 m/s², or customize local gravity.
Pressure units available: MPa, bar, psi (optional)
Pressure connector: Metric, (NPT and BSP is optional)
Base dimension: 185 mm (H) x 455 mm (L) x 380 mm (D)
Base weight: Appro.15kg

Pressure Selectable Sheet

P/N	Pressure Range	Kn Value	Effective Area	Mass Set
KQ250	(5~250) kPa	20kPa/kg	5 cm2	12.5kg
KQ400	(5~400) kPa	20kPa/kg	5 cm2	20kg
KQ600	(10~600) kPa	20kPa/kg	5 cm2	30kg
KQ1M	(20~1000) kPa	20kPa/kg	5 cm2	50kg
KQ1.6M	(30~1600) kPa	50kPa/kg	2 cm2	32kg
KQ2.5M	(40~2500) kPa	10.1MPa/kg	5 cm2	25kg
KQ4M	(0.1~4) MPa	0.2MPa/kg	0.5 cm2	20kg
KQ6M	(0.1~6) MPa	0.2MPa/kg	0.5 cm2	30kg
KQ10M	(0.2~10) MPa	0.2MPa/kg	0.5 cm2	50kg

Ordering info and accessories

Scope of delivery

BL502 Pneumatic deadweight tester base
Piston cylinder module
316SS increment mass set based on “MPa”
Adapter kits (1/4NPT, ½NPT, G¼, G½)

Optional Accessories

Customized “psi” unit 316SS mass set (P/N: IMS-PSI)
Series connection pneumatic molecule filter (P/N: 1554)
Parallel connection pneumatic molecule filter (P/N: 1555)
Liquid-gas separator filter, 10MPa (P/N: 1556)
CNAS accredited calibration certificate (P/N:9000-502)
Nitrogen gas bottle (buy locally)

Image gallery

BL506 Vacuum Dead weight Tester

BL506 Vacuum Dead weight Tester

With 0.01%rdg accuracy, the BL506 vacuum deadweight tester have dual vacuum and pressure modes. Pressure and vacuum application can be operated by hand pump or external gas supply.

To guarantee an excellent metrology-logic characteristic, all pistons and cylinders are made of tungsten carbide. Because of the extreme hardness of this material, the pressure distortion (expansion) coefficient is negligible. The low friction coefficient provides minutes of turning with just a little swing of the masses.

Overview

Accuracy is 0.02%rdg, 0.01%rdg, (Increased accuracy option of 0.005%)
Pressure ranges from vacuum to 0.6MPa
Dual vacuum/pressure models available
Pressure mode and vacuum mode can be switchable by PV selector
The piston and cylinder is tungsten carbide, which provides stability, durability, and low thermal coefficients and distortion.
External supply port for connection to the gas supply source or electric vacuum pump
Assembled 2-stages air purifier on a molecule filter level
High quality needle valves provide optimum control and sealing

Application

Primary pressure standard in lab
Reference vacuum measure in workshop

Specification

Accuracy: 0.01%rdg, 0.02%rdg, 0.005%rdg (customized)
Piston and cylinder material: Tungsten carbide
Mass material: Forged 316 stainless steel
Tester base and pump material: Aluminium
Seal material: Buna-N, FTM PTFE, Cu Alloy
Medium: Dry and clean air
Pressure units available: MPa, bar, psi (optional)
Pressure connector: Metric, (NPT and BSP is optional)
Gravity: Standard 9.80665 m/s², or customize local gravity.
Tester dimension: 500 mm (H) x 650 mm (L) x 500 mm (D)
Pump dimension: 225 mm (H) x 455 mm (L) x 380 mm (D)
Tester weight: Appro.25kg / Pump weight: Appro.15kg
Warranty: two years

Pressure Selectable Sheet

P/N	Pressure Range	Kn Value	Effective Area	Mass Set
KYQZ100	(-0.1~0.1) MPa	10kPa/kg	10 cm2	10kg+10 kg
KYQZ160	(-0.1~0.16) MPa	20kPa/kg	5 cm2	5 kg+8kg
KYQZ250	(-0.1~0.25) MPa	20kPa/kg	5 cm2	5 kg+12.5kg
KYQZ400	(-0.1~0.4) MPa	20kPa/kg	5 cm2	5 kg + 20kg
KYQZ600	(-0.1~0.6) MPa	20kPa/kg	5 cm2	5 kg + 30kg

Ordering info and accessories

Scope of delivery

BT506 Pneumatic deadweight tester base
Piston cylinder module
316SS increment mass set based on “MPa”
Adapter kits (1/4NPT, ½NPT, G¼, G½)

Optional Accessories

Customized “psi” unit 316SS mass set (P/N: IMS-PSI)
Series connection pneumatic molecule filter (P/N: 1554)
Parallel connection pneumatic molecule filter (P/N: 1555)
Liquid-gas separator filter, 10MPa (P/N: 1556)
CNAS accredited calibration certificate (P/N:9000-502)
Nitrogen gas bottle (buy locally)

Image gallery

BL507 Low Pressure Dead weight Tester

BL507 Low Pressure Dead Weight Tester

The model BL507 low pressure deadweight tester is ideal primary standard for defining the pressure scale in pneumatic range from 1.2kPa to 40kPa. The special design for piston model can ensure accuracy up to 0.01% of reading.

Overview

Pressure ranges from 1.2kPa to 40kPa
Accuracy 0.02%rdg, 0.01%rdg
Pressure resolution is 10 Pa / 0.04inch WC
Traceable to international Standard, supplied with ISO/IEC 17025 accredited certificate (optional)
The piston is 316 stainless steel, which have very small gap and cylinder error
The cylinder is tungsten carbide, which provides stability, durability and low thermal coefficients and distortion
Piston/cylinder design provides stability and repeatability
Pressure can be applied and adjusted by built-in handle wheel screw pump.
10 cm2 big piston areas can meet high precision float requirement
Built-in air purifier on a molecule filter level.
High quality needle valves provide optimum control and sealing
Quick and simple to operate by hand.

Application

Primary pressure standard in lab
Reference pressure measure in workshop

Specification

Model	BL507
Accuracy	0.02%rdg / 0.01%rdg
Resolution	10Pa / 0.1mbar / 0.04inch water
Piston material	316 stainless steel
Cylinder material	Tungsten carbide
Mass material	Forged 316 stainless steel
Hydraulic base material	Aluminium
Seal material	Buna-N
Medium	Dry air
Gravity	Standard 9.80665 m/s² or customize local gravity
Pressure units	kPa, mbar, inch water (optinal)
Pressure connector	NPT and BSP is optional
Base dimension	185mm (H) x 455mm (L) x 380mm (D)
Base weight	Appr.10kg
Warranty	2 years

Pressure Range Selectable Sheet

Part Number	KYQ10	KYQ16	KYQ25	KYQ40
Pressure Range	(1.2~10) kPa	(1.2~16) kPa	(1.2~25) kPa	(1.2~40) kPa
Kn Value	10kPa/kg	10kPa/kg	10kPa/kg	10kPa/kg
Effective Area	10 cm2	10 cm2	10 cm2	10 cm2
Mass Set	1 kg	1.6 kg	2.5 kg	4 kg

Ordering info and accessories

Scope of delivery

BL507 Low pressure deadweight tester base
Piston cylinder module
316SS increment mass set based on“kPa” pressure units
Adapter kits (1/4NPT, ½NPT, ¼G, ½G)
Factory calibration report
Operating manual
Transit case

Optional Accessories

Customized “psi” unit 316SS mass set (P/N: IMS-PSI)
Piston and cylinder module (P/N: PCM-X)
Liquid-gas separator filter,10MPa (P/N: 1556)
CNAS accredited calibration certificate (P/N:9000-507)

Image gallery

BL508 Differential Pressure Dead Weight Tester

BL508 Differential Pressure Deadweight Tester

The model BL508 high static differential pressure deadweight tester ideal primary standard for defining the static pressure up to 60MPa.

Both the piston and cylinder are manufactured from tungsten carbide. This pairing of materials, in comparison to other materials, has very low pressure and temperature coefficients of expansion, which results in a very good linearity for the effective area of the piston and a very high accuracy. Over-pressure protection is integrated, which prevents the piston from being forced out vertically and avoids damage to the piston-cylinder system in the event of masses removal under pressure.

Overview

Static pressure ranges 0.1MPa to 60MPa;
Differential pressure is (0.05~1000) kPa
Accuracy is 0.01% rdg for single piston, or (2Pa + 5x10-7*P + 1x10-4*△P) for dual pistons
Traceable to International Standards.
The piston and cylinder is made of the high intensity, extreme hardness and lowest thermal expansion tungsten carbide
Piston/cylinder design provides stability and repeatability
Lowering speed of differential piston is 0.5mm per minute with 5 kg loading
Sensitivity threshold at zero is 10mg.

Application

Primary pressure standards in laboratories
Precision pressure measurement

Specification

Model	BL508
Accuracy	When use one of two piston gauges, accuracy is 0.01%rdg; When test static pressure, accuracy is (2Pa + 5x10-7P + 1x10-4△P), where P= Static Pressure Pa, △P = differential pressure value
Piston material	Tungsten carbide
Cylinder material	Tungsten carbide
Mass material	Forged 316 stainless steel
Hydraulic base material	Casting iron
Seal material	Buna-N, FTM, PTFE, Copper Alloy
Medium	Mineral oil lubricated and pure nitrogen operated (built in oil-gas separator)
Gravity	Standard 9.80665 m/s² or customize local gravity
Pressure units	MPa, bar, psi (optional)
Pressure connector	Metric, (NPT and BSP is optional)
Base dimension	540 mm (H) x 625 mm (L) x 480 mm (D)
Base weight	Appr.35kg
Warranty	2 years

PRESSURE SELECTABLE SHEET

Part Number	Pressure Range	Kn Value	Effective Area	Piston & Cylinder	Increment Mass Set	Media
GCY7	(0.1~7) MPa	0.5MPa/kg	0.2 cm2	200g	14kg+14kg	N2
GCY20	(0.5~20) MPa	1MPa/kg	0.1 cm2	500g	20kg+20kg	N2
GCY60	(1~60) MPa	2MPa/kg	0.05cm2	500g	30kg+30kg	N2

Ordering info and accessories

Scope of delivery

BL508 Static pressure deadweight tester base
Piston cylinder module
“MPa” 316SS increment mass sets
Adapter kits (1/4NPT, ½NPT, ¼BSP, ½BSP)
Factory calibration report
Operating manual

Optional Accessories

Customized “psi” unit 316SS mass set (P/N: IMS-PSI)
Oil-Water Separator, 40 MPa, no diaphragm (P/N: 1556-40)
Oil-Water Separator, 70 MPa, no diaphragm (P/N: 1556-70)
CNAS accredited calibration certificate (P/N:9000-502)

Image gallery

BL510 Portable Pressure Dead weight Tester

BL510 Portable Pressure Dead weight Tester

The model BL510 portable deadweight tester provide a precise means for generating pressure with high accuracy that can be used as a primary calibration standard.

The unit's built-in shuttle valve provides the means to control the rate of pressure increase, while precision adjustment is accomplished with an integral micro vernier displacement valve.

An ideal product that offers a rugged field ready primary standard, certified to yield consistent accurate results

Overview

Pressure Range: up to 100 MPa
Accuracy: to ±0.05% of Indicated Reading
Piston and cylinder are tungsten carbide
Piston rod is anti-broken structure
Interchangeable weights
Compact design and portability
Positive over-pressure protection
Robust construction
Includes complete set of weights for pressure generation
Complete tester with tools, cases, and fittings

Application

Primary pressure standards in laboratories
Precision pressure measurement

Specification

Model	BL510
Accuracy	±0.05% of reading
Range pressure	15 psi to 15,000 psi
Piston material	Tungsten carbide
Cylinder material	Tungsten carbide
Mass material	Carbon steel
Certificate	CNSA calibration traceable
Seal material	Buna-N
Fluid	Sebacate (≥25MPa)
Gravity	Standard 9.80665 m/s² or customize local gravity
Pressure units	MPa, bar, psi, kg/cm2
Working ambient temperature	15~25℃
Base dimension	300 x 320 x 260 mm
Tester net weight	Appr.12kg
Warranty	2 years

PRESSURE SELECTTABLE SHEET

P/N	Pressure Range	Kn	Effective Area	Mass Set
KY0	(0.04~0.6) MPa	0.1MPa/kg	1cm2	6kg
KY1	(0.04~1) MPa	0.1MPa /kg	1cm2	10kg
KY6	(0.1~6) MPa	0.5MPa /kg	0.2 cm2	12kg
KY25	(0.5~25) MPa	1MPa /kg	0.1 cm2	25kg
KY60	(1~60) MPa	2MPa/kg	0.05 cm2	30kg
KY70	(1~70) MPa	2MPa/kg	0.05 cm2	35kg
KY100	(1~100) MPa	2MPa/kg	0.05 cm2	50kg
KY160	(2~160) MPa	2MPa/kg	0.05 cm2	80kg
KY250	(5~250) MPa	5MPa/kg	0.02 cm2	50kg

Ordering info and accessories

Scope of delivery

BL510 Portable deadweight tester with metal carrying case
Piston cylinder module with mini storage case
Carbon steel increment mass set with carrying case
Adapter kits (1/4’’ NPT, ½’’ NPT, ¼’’ G, ½’’ G)
Tool box includes pointer puller set and wrenches
Factory calibration report
Tester with metal case

Optional Accessories

316 stainless steel increment mass set
Ethylene Propylene and Viton O-ring bag
ISO17025 CNAS accredited calibration certificate

Image gallery

BL511 Hydraulic Pressure Dead weight Tester

BL511 Hydraulic Pressure Deadweight Tester

With 0.01% of reading accuracy, pressure ranges from 40kPa to 250MPa, the model BL511 hydraulic deadweight testers are applicable in very wide variety of pressure calibration and measurement tasks.

The piston cylinder assembly is the heart of the dead weight tester and responsible for its high accuracy. We manufacture piston cylinder with accuracies from 0.05% up to 0.005% of reading. To give an idea of the manufacturing skills, the space between the piston and the cylinder is in the um range and can only be measured in a climate room.

Overview

Accuracy is 0.05%rdg, 0.02%rdg, 0.01%rdg
Pressure ranges from 40kPa to 250MPa
The piston and cylinder are made of the high intensity, extreme hardness and lowest thermal expansion tungsten carbide
Piston/cylinder design provides stability and repeatability
Piston rod is anti-broken structure
Piston location is ± 1.5 mm
Piston rotation speed is (30-60) r/min
Mass w/ plate carriers make stable rotation
Modularized design, use friendly

Application

Primary pressure standards in laboratories
Reference instruments on the workshop.

Specification

Model	BL511
Accuracy	0.01%rdg, 0.02%RD, 0.05%RD
Piston material	Tungsten carbide
Cylinder material	Tungsten carbide
Mass material	Forged 316 stainless steel
Hydraulic base material	Aluminium
Seal material	Buna-N, FTM, PTFE, Cu Alloy
Fluid	Mineral Oil(<25MPa); Sebacate (≥25MPa)
Gravity	Standard 9.80665 m/s² or customize local gravity
Pressure units	MPa, bar, psi (optional)
Connector	Metric, (NPT and BSP is optional)
Base dimension	225 mm (H) x 455 mm (L) x 380 mm (D)
Tester net weight	Appr.18kg
Warranty	2 years

Pressure Selectable Sheet

P/N	Pressure Range	Kn	Effective Area	Mass Set
KY0	(0.04~0.6) MPa	0.1MPa/kg	1cm2	6kg
KY1	(0.04~1) MPa	0.1MPa /kg	1cm2	10kg
KY6	(0.1~6) MPa	0.5MPa /kg	0.2 cm2	12kg
KY25	(0.5~25) MPa	1MPa /kg	0.1 cm2	25kg
KY60	(1~60) MPa	2MPa/kg	0.05 cm2	30kg
KY70	(1~70) MPa	2MPa/kg	0.05 cm2	35kg
KY100	(1~100) MPa	2MPa/kg	0.05 cm2	50kg
KY160	(2~160) MPa	2MPa/kg	0.05 cm2	80kg
KY250	(5~250) MPa	5MPa/kg	0.02 cm2	50kg

Ordering info and accessories

Scope of delivery

BL511 Hydraulic deadweight tester base
Piston cylinder module
“MPa” pressure units 316SS increment mass set
Adapter kits (1/4NPT, ½NPT, ¼G, ½G)
Factory calibration report

Optional Accessories

Customized “psi” unit 316SS mass set (P/N: IMS-PSI)
CNAS accredited calibration certificate (P/N:9000-511)
Oil-Water Separator, 40 MPa, no diaphragm (P/N: 1556-40)
Oil-Water Separator, 70 MPa, no diaphragm (P/N: 1556-70)

Image gallery

BL513 Water Pressure Dead weight Tester

BL513 Water Pressure Dead weight Tester

The model BL513 water deadweight testers are applicable oil-free pressure calibration and measurement solution. The oil-free test performance of BL513 is much better than other solution of hydraulic piston gauges plus oil-water separator.

The piston and cylinder is the technical heart of deadweight tester. Our experience and knowledge of piston/cylinder production and calibration ensure the precision and performance required for wide demanding calibration requirements.

Overview

Water media operation
Accuracy 0.05%rdg, 0.02%rdg, 0.01%rdg, (Increased accuracy option of 0.005%rdg)
Minimum pressure 500kPa, while maximum pressure is up to 100MPa
The piston and cylinder is tungsten carbide, which provides stability, durability, and low thermal coefficients and distortion.
Piston/cylinder design provides stability and repeatability
Mass set is 316 stainless steel material
Hydraulic base is stainless steel material
High quality needle valves provide optimum control and sealing
In-field user friendly

Application

Primary pressure standard for oil-free gauge
Reference instruments in field.

Specification

Model	BL513
Accuracy	0.05%rdg, 0.01%rdg, 0.02%rdg, (Increased accuracy option of 0.005%rdg
Piston material	Tungsten carbide
Cylinder material	Tungsten carbide
Mass material	Forged 316 stainless steel
Hydraulic base material	Stainless Steel
Seal material	Buna-N, FTM, PTFE, Cu Alloy
Fluid	Pure distilled water
Gravity	Standard 9.80665 m/s² or customize local gravity
Pressure units	MPa, bar, psi (optional)
Connector	Metric, (NPT and BSP is optional)
Base dimension	225 mm (H) x 455 mm (L) x 380 mm (D)
Tester net weight	Appr.20kg
Warranty	2 years

PRESSURE SELECTABLE SHEET:

Part Number	KYS25	KYS60	KYS70	KYS100
Pressure Range	(0.5~25) MPa	(1~60)MPa	(1~70)MPa	(1~100)MPa
Kn	1 MPa/kg	2 MPa/kg	2 MPa/kg	2 MPa/kg
Effective Area	0.1 cm2	0.05 cm2	0.05 cm2	0.05 cm2
Mass Set	25kg	30kg	35kg	50kg

Ordering info and accessories

Scope of delivery

BL513 Water deadweight tester base
Piston cylinder module
“MPa” 316SS increment mass set
Adapter kits (1/4NPT, ½NPT, ¼G, ½G)
Operating manual
Transit case

Optional Accessories

Customized “psi” unit 316SS mass set (P/N: IMS-PSI)
CNAS accredited calibration certificate (P/N:9000-513)

Image gallery

BL516 Hydraulic Pressure Balance

BL516 Hydraulic Pressure Balance

The model BL516 Hydraulic Pressure Balances are widely applicable in primary pressure calibration laboratory.

Overview

Uncertainty is up to 0.005%RD
Pressure scale in a range up to 250MPa
The piston and cylinder is made of the high intensity, extreme hardness and lowest thermal expansion tungsten carbide
Piston/cylinder design provides stability and repeatability
Built-in thermometer, 0.01℃ reading
± 1.5mm Piston vertical travel indicator
Motor drive piston and mass rotating
High quality needle valves provide optimum control and sealing

Application

Primary pressure calibration in lab
Precision pressure measurement

Specification

Model	BL516
Accuracy	0.005%RD
Piston material	Tungsten carbide
Cylinder material	Tungsten carbide
Mass material	Forged 316 stainless steel
Hydraulic base material	Casting iron
Seal material	Buna-N, FTM, PTFE, Cu Alloy
Fluid	Mineral Oil (<25MPa); Sebacate (≥25MPa)
Gravity	Standard 9.80665 m/s² or customize local gravity
Pressure units	MPa, bar, psi (optional)
Connector	Metric, (NPT and BSP is optional)
Base dimension	410 mm (H) x 375 mm (L) x 445 mm (D)
Tester net weight	Appr.32kg
Warranty	2 years

Pressure Selectable Sheet

P/N	Pressure Range	Kn	Effective Area	Mass Set
KY0.6	(0.04~0.6) MPa	0.1MPa/kg	1cm2	6kg
KY6	(0.1~6) MPa	0.5MPa /kg	0.2 cm2	12kg
KY25	(0.5~25) MPa	1MPa /kg	0.1 cm2	25kg
KY60	(1~60) MPa	2MPa/kg	0.05 cm2	30kg
KY70	(1~70) MPa	2MPa/kg	0.05 cm2	35kg
KY100	(1~100) MPa	2MPa/kg	0.05 cm2	50kg
KY160	(2~160) MPa	2MPa/kg	0.05 cm2	80kg
KY250	(5~250) MPa	5MPa/kg	0.02 cm2	50kg

Ordering info and accessories

Scope of delivery

BL516 Hydraulic Pressure Balance base
Piston cylinder module
“MPa” pressure units 316SS increment mass set
Adapter kits (1/4NPT, ½NPT, ¼G, ½G)
Factory calibration report
Operating manual

Optional Accessories

Customized “psi” unit 316SS mass set (P/N: IMS-PSI)
CNAS accredited calibration certificate (P/N:9000-511)
Oil-Water Separator, 40 MPa, no diaphragn (P/N: 1556-40)
Oil-Water Separator, 70 MPa, no diaphragn (P/N: 1556-70)

Image gallery

Baluntech BL676 Portable Infrared Calibration Source

BL676 Portable Infrared Calibration Source

Temperature range 50℃ to 500℃

Emissivity is better than 0.995

Temperature uniformity is up to 0.15℃

50 mm aperture diameter end close tube emitter

Built-in temperature correction function

Light weight, easy to carry

Robust construction

Overview

The BL676 is a portable blackbody calibration source utilizing a digital indicating temperature ambient 50 to 500℃ (122F to 932F). A precision platinum RTD temperature sensor is embedded in the blackbody emitter, providing high accuracy and repeatability. The temperature controller uses the industry standard PID algorithms to control the emitter temperature to within 0.1℃ of the set points.

The black body emitter mechanism uses a resistive heating device that provides a long life, short stabilization times, and stable temperature control.

Applications

Infrared temperature sensors
Infrared thermal imaging systems
Spectrographic analysers
Radio meters
Flux meter

Specifications

Temperature Range	50℃ to 500℃ (122F to 932F)
Aperture diameter	50 mm
Emissivity	> 0.995
Display resolution	0.1℃
Control stability (10 min)	±0.1℃ or 0.1%t (whichever is greater)
Blackbody uniformity	0.15℃ or 0.15%t (whichever is greater)
Heat cavity shape	End closed tube
Control method	Digital PID controller with readout
Temperature sensor	Precision Platinum RTD
Power supply	220V AC, 500 WA
Interface	RS232
Heat up time	less than 1 hour from ambient to 500℃
Calibration method	Pyrometric standard calibration
Dimension	260mm(D) x 200mm(W) x 260mm(H)
Net weight	Appr. 5 kg

Order Info

Scope of delivery

BL676 Portable infrared calibration source
Power cord
User manual
Factory calibration report

Optional Accessories

Handheld carrying case
Accreditedcalibration certificate (P/N: 9000-676)
RS485 into RS232 adapter (P/N: 1621)
110V AC convert (P/N: 1620)

Image gallery

Baluntech BL677 Portable Infrared Calibration Source

BL677 Portable Infrared Calibration Source

Temperature range 50℃ to 500℃

Emissivity is better than 0.995

Temperature uniformity is up to 0.15℃

0.1℃ High temperature control stability

65 mm big aperture diameter is compliance with most of D:S

Built-in temperature correction function

Robust construction

Overview

The BL677 is a portable blackbody calibration source utilizing a digital indicating temperature ambient 50 to 500℃ (122F to 1292F). A precision platinum RTD temperature sensor is embedded in the blackbody emitter, providing high accuracy and repeatability. The temperature controller uses the industry standard PID algorithms to control the emitter temperature to within 0.1℃ of the set points.

The black body emitter mechanism uses a resistive heating device that provides a long life, short stabilization times, and stable temperature control.

Applications

Infrared temperature sensors

Infrared thermal imaging systems

Spectrographic analysers

Radio meters

Flux meter

Specifications

Temperature Range	500℃ to 700℃ (122F to 1292F)
Aperture diameter	65 mm
Emissivity	> 0.995
Distance from tube to target	250 mm
Display resolution	0.1℃
Control stability (10 min)	±0.1℃ or 0.1%t (whichever is greater)
Blackbody uniformity	0.15℃ or 0.15%t (whichever is greater)
Heat cavity shape	End closed tube
Control method	Digital PID controller
Temperature sensor	Precision Platinum RTD
Power supply	220V AC, 1000 WA
Interface	RS232
Heat up time	1.5 hour from ambient to 700℃
Calibration method	Pyrometric standard calibration
Dimension	360mm(D) x 260mm(W) x 400mm(H)
Net weight	Appr. 15 kg

Order Info

Scope of delivery

BL677 Portable infrared calibration source
Power cord
User manual
Factory calibration report

Optional Accessories

Handheld carrying case
Accredited calibration certificate (P/N: 9000-677)
RS485 into RS232 adapter (P/N: 1621)
110V AC convert (P/N: 1620)

Image gallery

Baluntech BL765 Portable Infrared Calibration Source

BL675 Portable Infrared Calibration Source

Temperature range 50 to 500℃

150 mm big aperture diameter

0.2℃ high temperature uniformity

Built-in temperature correction function

Robust design, easy to carry

Overview

The BL675 is a portable blackbody calibration source utilizing a digital indicating temperature ambient 50 to 500℃ (122F to 932F). A precision platinum RTD temperature sensor is embedded in the blackbody emitter, providing high accuracy and repeatability. The temperature controller uses the industry standard PID algorithms to control the emitter temperature to within 0.1℃ of the set points.

The black body emitter mechanism uses a resistive heating device that provides a long life, short stabilization times, and stable temperature control.

Applications

Infrared temperature sensors

Infrared thermal imaging systems

Spectrographic analysers

Radio meters

Flux meter

Specifications

Temperature Range	50℃ to 550℃ (122F to 932F)
Aperture diameter	150 mm
Emissivity	> 0.95
Accuracy	> 0.1℃
Display resolution	0.1℃
Control stability (10 min)	±0.15℃ or 0.15%t (whichever is greater)
Blackbody uniformity	0.2℃ or 0.2%t (whichever is greater)
Heat cavity shape	Spherical
Control method	Digital PID controller
Temperature sensor	Precision Platinum RTD
Power supply	220V AC, 1000 WA
Interface	RS232
Heat up time	1 hour from ambient to 550℃
Calibration method	Pyrometric standard calibration
Dimension	350mm(D) x 220mm(W) x 260mm(H)
Net weight	Appr. 15 kg

Order Info

Scope of delivery

Portable Infrared calibration source
Power adapter as standard 100 -240V AC
Factory calibration report

Optional Accessories

Handheld Carrying case (P/N: 1570)
Accredited calibration certificate (P/N: 9000-675)
RS485 into RS232 adapter (P/N: 1621)
110V AC convert (P/N: 1620)

Image gallery

BL678 Portable Infrared Calibration Source

BL678 Portable Infrared Calibration Source

Temperature range 300℃ to 1200℃

Emissivity is better than 0.995

Temperature uniformity is up to 0.15℃

50 mm aperture diameter is compliance with most of D:S

Build-in temperature correction function

Overview

The BL678 is a portable blackbody calibration source utilizing a digital indicating temperature ambient 300 to 1200℃ (572F to 2192F). A precision platinum thermocouple N temperature sensor is embedded in the blackbody emitter, providing high accuracy and repeatability. The temperature controller uses the industry standard PID algorithms to control the emitter temperature to within 0.1℃ of the set points.

The black body emitter mechanism uses a resistive heating device that provides a long life, short stabilization times, and stable temperature control.

Applications

Infrared temperature sensors

Infrared thermal imaging systems

Spectrographic analysers

Radio meters

Flux meter

Specifications

Temperature Range	300℃ to 1200℃ (572F to 2192F)
Aperture diameter	50 mm
Emissivity	> 0.995
Accuracy	> 0.1℃
Display resolution	0.1℃
Control stability (10 min)	±0.1℃ or 0.1%t (whichever is greater)
Blackbody uniformity	0.15℃ or 0.15%t (whichever is greater)
Heat cavity shape	End closed tube
Control method	Digital PID controller
Temperature sensor	Precision N thermocouple
Power supply	110-230V AC, 1000 WA
Interface	RS232
Warm up time	1.5 hour from ambient to 1200℃
Calibration method	Pyrometric standard calibration
Dimension	350mm(D) x 220mm(W) x 260mm(H)
Net weight	Appr. 25 kg

Order Info

Scope of delivery

BL678 Portable infrared calibration source
Power cord
User manual
Factory calibration report

Optional Accessories

Handheld carrying case
Accredited calibration certificate (P/N: 9000-678)
RS485 into RS232 adapter (P/N: 1621)
110V AC convert (P/N: 1620)

Image gallery

BL670 Mini Blackbody Calibration Source

BL670 Portable Infrared Calibrator / Black Body

Temperature 35℃ to 45℃
Target size is 70mm x 70mm
Emissivity is 0.95
Accuracy is better than ± 0.1℃
Control stability is ± 0.1℃ per hour
Heat up time is 2-10 minutes depends
Built-in temperature correction function

Overview

The BL670 is a small size blackbody calibration source utilizing a digital indicating temperature ambient 35℃ to 45℃ (95 to 113F). A precision platinum RTD temperature sensor is embedded in the blackbody emitter, providing high accuracy and repeatability. The temperature controller uses the industry standard PID algorithms to control the emitter temperature to within 0.1℃ of the set points. The black body emitter mechanism uses a resistive heating device that provides a long life, short stabilization times, and stable temperature control.

Applications

Calibrate radiation thermometer

Infrared temperature sensors

Specifications

Order info

Scope of delivery

BL670 portable blackbody calibration source

Power adapter as standard 110-240V AC

Factory calibration report

Optional Accessories

Accredited calibration certificate (P/N: 9000-670)

RS485 interface function for BL670 (P/N: 2231)

Tripod with carrying bag (P/N:670-TP)

Image gallery

BL761 Portable Infrared Calibrator / Black Body

BL671 Portable Infrared Calibrator / Black Body

0.05℃ high stability
Calibrate from 30℃ to 50℃
Quickly heat up to 50℃ in 10 minutes
Target size is 70mm x 70mm
Built-in temperature correction function
Quick and easy operate
Portable and light weight

Overview

The BL671 is a small size blackbody calibration source utilizing a digital indicating temperature ambient 30℃ to 50℃ (86F to 122F). A 70x70 mm size ridged plate is heated or cooled with an internal solid-state thermoelectric heat pump. It has a built-in digital temperature controller to provide accurate, stable temperature as well as to provides readout.

Applications

Infrared thermometer calibration
Thermal image calibration

Specifications

Temperature Range	30℃ to 50℃ (32F to 122F)
Aperture size	70 mm * 70 mm
Emissivity	0.97 ± 0.02
Display accuracy	± 0.05℃, (uncertainty is 0.2℃, K=2)
Display resolution	0.01℃
Control stability	± 0.05℃ after 10 minutes
Blackbody uniformity	± 0.05℃
Heat cavity shape	Plat Plate
Heat up time	10 minute from ambient to 50℃
Control method	Digital PID controller with readout
Temperature sensor	Precison platinum RTD
Power supply	110-220V AC, 50Hz, 60W
Interface	RS232
Dimension	250mm(D) x 140mm(W) x 180mm(H)
Net weight	Appr. 2 kg

Order info

SCOPE OF DELIVERY

BL671 Portable blackbody calibration source with carrying case

Power adapter as standard 110-240V AC

Factory calibration report

OPTIONAL ACCESSORIES

USB into RS232 adapter (P/N:1622)

Accredited calibration certificate (P/N: 9000-671)

Tripod with carrying bag (P/N: 67X-TP)

Image gallery